Provider 6000 Dual Channel

Recommended Uses:	Any ambulatory therapy requiring dual-channel operation. Although each channel can be used with single sets for independent infusion, a specialized two-into-one set is available (13585-01) specifically for this device.
Features:	Can perform continuous, inter- mittent, or PCA pain manage ment in combination, with each side independently-programmed. Can use dual infusion set or two single sets. Can be programmed in milliliters (ml) or in cubic centimeters (cc). Remote bolus cord, carry pouch for waist or over shoulder. Real-time clock, each side can be programmed for different start time.
Rate Parameters:	0.1 - 250 cc/hr.
Volume Parameters:	0.1 cc or mg. equivalent - 3000 cc or mg. equivalent up to maximum of 9999.9 mg.
Memory protection:	one year (internal lithium battery)
Battery capacity:	two 9-volt alkalines provide approx. 2500 cc at rates over 50 cc/hr.
Alarms:	Air-in-line, Callback alert, check line, empty container, end of infusion, internal malfunction, limit exceeded, low battery, overuse of prime, system error

Recommended Uses:	Single-channel pump designed to deliver analgesia for epidural or PCA pain management. Can also be used for other therapies which require rates at or below 25 ml/hr involving continuous or bolus infusion.
Features:	Can by programmed in three units of measure: milliliters (ml), milligrams (mg), or micrograms (m g). Program locking capability, remote bolus cord, carry case; optional pole-mounted lock box, printer and accessories.
Power source options:	AC power, rechargeable snap-in battery pack, or 2 9-volt alkaline batteries. Lithium 9-volts batteries not recommended.
Rate Parameters:	0.1 - 25.0 ml/hr.
Volume Parameters:	minimum- 0.1 ml or 0.1 mg or 0.1 m g. maximum- 25.0 ml or equivalent mg or m g (range: 0.1 to 9999.9)
Memory protection:	one year (internal lithium battery)
Battery capacity:	9-volt alkalines- 4 days at 6.0 ml/hr Battery pack- 5 days at 6.0 ml/hr. Full recharge requires up to 6 hours.
Alarms:	Air-in-line, callback alert, change batteries, check cartridge, empty container, end of infusion, internal malfunction, limit exceeded, low battery, occlusion, on batteries, purge overuse, system error.

13414-01	110" non-vented pump set with Quick-Load cartridge and extension set with 1.2 micron filter, integral anti-siphon valve, distal Y-injection site, secure lock, priming volume 7.0 ml.
13610-01	110" non-vented pump set with Quick-Load cartridge and Y-extension set with integral anti-siphon valve, secure lock, priming volume 4.8 ml.
13503-01	Non-DEHP set
13511-01	110" non-vented pump set with Quick-Load cartridge, Drop-in anti-siphon valve and Yellow Striped PVC tubing, priming volume 4.2 ml. secure lock, Appropriate for epidural infusion.
13402-01	110" non-vented pump set with Quick-Load cartridge and extension set with integral anti-siphon valve, Yellow Striped PVC tubing, priming volume 4.8 ml, secure lock, Appropriate for epidural infusion.
13510-01	110" non-vented pump set with Quick-Load cartridge and extension set with integral anti-siphon valve, Yellow Striped PVC tubing, priming volume 4.8 ml. secure lock, Appropriate for epidural infusion.,
13512-01	110" non-vented pump set with Quick-Load cartridge and extension set with integral anti-siphon valve and distal Y-injection site, priming volume 4.4 ml. secure lock.
13513-01	110" non-vented pump set with Quick-Load cartridge and extension set with 0.2 micron filter, distal Y-injection site, integral anti-siphon valve, secure lock, priming volume 7.0 ml.
13626-01	80" non-vented pump set with Quick-Load cartridge and integral anti-siphon valve, Yellow Striped PVC tubing, priming volume 3.6 ml. secure lock, Appropriate for epidural infusion.
13580-01	80" non-vented pump set with Quick-Load cartridge and extension set with integral anti-siphon valve, secure lock, priming volume 3.6 ml.
13560-01	80" non-vented pump set with Quick-Load cartridge and extension set with integral anti-siphon valve, distal Y-injection site, secure lock, priming volume 3.7 ml.
13570-01	80" pump set with Quick-Load cartridge and 0.2 micron filter, add-on anti-siphon valve, secure lock, priming volume 6.0 ml.
13575-01	80" pump set with Quick-Load cartridge and 1.2 micron filter, add-on anti-siphon valve, secure lock, priming volume 6.0 ml.
13403-01	80" pump set with Quick-Load cartridge and drop-in anti-siphon valve, secure lock, priming volume 3.4 ml.
13611-01	67" pump set with Quick-Load cartridge, female luer adapter, integral anti-siphon valve, Y-extension set with backcheck valve and secure lock, priming volume 2.9 ml.
13625-01	67" pump set with Quick-Load cartridge anti-siphon valve, priming volume 2.8 ml.