Medical Specialties
Med Spec One Infusion Pump

The Med Spec One is a linear peristaltic positive-pressure pump manufactured by Sigma for Medical Specialties. It is identical in features and appearance, aside from the color and face-plate labels, to the Sigma 6000+ Programmable Pump, except that it will only accept Medical Specialties MED SPEC ONE infusion sets (see list below). Because of these sets, it is rated at ± 6% accuracy rather than ± 5% of the comparable Sigma pump.

The MED SPEC ONE offers both a primary and secondary infusion mode, in addition to a 12-step sequential rate and volume programming feature which allows stepped delivery of TPN and antibiotic infusion. The pump can also be programmed for maximum and minimum rates or volumes, or mandatory drop sensor, if required by the customer. Keypad lockout is available.

Use of the optional drop sensor in the program mode will disable the in-pump ultrasonic air-in-line detection system, useful for customers experiencing nuisance air alarms because of a frothy solution or "champagning" of air bubbles.

The pump has a 3-hour memory after power-off in Primary Mode, and a Permanent memory in the Program Mode.

Rate Parameters:

0.1 - 999 ml/hr.

Volume Limit Range:

0.1 - 9999 ml.

Battery Life:

Fully-charged, 6 hours (18-hour recharge required)

KVO:

1 ml/hr., or infusion rate if < 1 ml/hr.

Occlusion Pressure:

11 ± 7 PSI

Accuracy:

± 6 %

Memory:

3 Hours in Primary Mode, Permanent in Program Mode

Alarms:

Air, Occlusion, Proximal Occlusion/Empty Bottle (requires optional flow sensor), Check Tube, Shut Door, Infusion Complete, Program Complete, Low Battery/Plug In, Malfunctions (H/L Rate, Pump Fail, Multifail, Bad RAM).

Compatible Administration Sets:

MS701PG

81", Universal, 20 drops/ml, roller clamp, luer lock

MS703P

82", Non-vented, 20 drops/ml, roller clamp, luer lock

MS704PG

103", Non-vented, 20 drops/ml, roller clamp, luer lock

MS709P

108", Non-vented, 20 drops/ml, roller clamp, luer lock, 0.2m filter (96-hour)

MS711P

108", Universal, 60 drops/ml, roller clamp, luer lock, 0.2m filter, one prox. Y-injection site

MS716P

108", Universal, 20 drops/ml, roller clamp, luer lock, 0.2m filter (96-hour)

MS717P

108", Universal, 20 drops/ml, roller clamp, luer lock, 1.2m filter (96-hour)

MS719P

103", Universal, 20 drops/ml, roller clamp, luer lock

MS720P

92", Universal, 20 drops/ml, roller clamp, luer lock, one proximal Y-injection site, backcheck valve

MS721P

Secondary set, 40", Universal, 20 drops/ml, roller clamp, pre-attached 18-gauge needle used to piggyback with MS720P, hanger included

MS728

Non-DEHP, 92", Universal, 20 drops/ml, 0.2m filter, luer lock, roller clamp above filter, slide clamp below filter